Bosch B426 Manual

The Bosch B426 is suitable for numerous secure commercial and industrial applications. With flexible end-to-end transmission path monitoring, AES encryption and protection against unauthorized replacements, the B426 is the ideal solution for high-security applications and fire monitoring. It can be used as a stand-alone transmission path or together with other signal transmission tools. The Bosch B426 complies with UL864 and NFPA72 standards for simple signal transmission with approved Bosch control panels and is therefore ideal for use in fire monitoring. Typical applications are Message transmission and monitoring of the transmission path to a Conettix control station receiver. Remote management and remote control using Remote Parameterization Software (RPS) or our application for operation via mobile devices. Connection to building automation and integration systems.

Bosch B426 Manual

General characteristics of Bosch B426 complete two-way IP event protocol with remote parameterization Central support. 10/100 Base-T Ethernet communication for IPv6 and IPv4 networks. NIST-FIPS 197 certified for 128-bit to 256-bit AES encryption for line security. Plug-and-play installation, including UPnP service to enable remote parameterization behind a firewall. advanced configuration via browser or RPS with compatible Bosch control panels. Ambient conditions Relative humidity: up to 93%, non-condensing. Operating temperature: 0 °C to +49 °C. Dimensions of the board: 59.5 mm x 108 mm x 16 mm.

Compatible control panels of Bosch B426 is AMAX 2000/2100/3000/4000, B Series, GV4 Series, GV3 Series, GV2 Series, G Series, Version 6.3 or higher, D9412/D7412/D7212, D9112, DS7220 Version 2.10 or higher, DS7240 version 2.10 or higher, DS7400XiV4 version 4.10 or higher, Easy Series V3+, FPD-7024, Solution 2000/3000. Current consumption (maximum) 90 mA. Operating voltage 12 VDC nominal. Ports LAN/WAN: RJ-45 modular socket (Ethernet). cabling of Bosch B426 Ethernet cable: Category 5 or higher UTP cable. Ethernet cable length: Maximum length: 100 m (328 ft). Cable diameter data bus: 18 AWG or 22 AWG. Data bus cable length: maximum distance - cable size:150 m (500 ft) - 0.65 mm (22 AWG); 300 m (1000 ft) - 1.02 mm (18 AWG.

Download Bosch B426 Manual PDF

Subscribe to receive free email updates: